% Options for packages loaded elsewhere
\PassOptionsToPackage{unicode}{hyperref}
\PassOptionsToPackage{hyphens}{url}
%
\documentclass[
]{article}
\usepackage{amsmath,amssymb}
\usepackage{iftex}
\ifPDFTeX
  \usepackage[T1]{fontenc}
  \usepackage[utf8]{inputenc}
  \usepackage{textcomp} % provide euro and other symbols
\else % if luatex or xetex
  \usepackage{unicode-math} % this also loads fontspec
  \defaultfontfeatures{Scale=MatchLowercase}
  \defaultfontfeatures[\rmfamily]{Ligatures=TeX,Scale=1}
\fi
\usepackage{lmodern}
\ifPDFTeX\else
  % xetex/luatex font selection
\fi
% Use upquote if available, for straight quotes in verbatim environments
\IfFileExists{upquote.sty}{\usepackage{upquote}}{}
\IfFileExists{microtype.sty}{% use microtype if available
  \usepackage[]{microtype}
  \UseMicrotypeSet[protrusion]{basicmath} % disable protrusion for tt fonts
}{}
\makeatletter
\@ifundefined{KOMAClassName}{% if non-KOMA class
  \IfFileExists{parskip.sty}{%
    \usepackage{parskip}
  }{% else
    \setlength{\parindent}{0pt}
    \setlength{\parskip}{6pt plus 2pt minus 1pt}}
}{% if KOMA class
  \KOMAoptions{parskip=half}}
\makeatother
\usepackage{xcolor}
\setlength{\emergencystretch}{3em} % prevent overfull lines
\providecommand{\tightlist}{%
  \setlength{\itemsep}{0pt}\setlength{\parskip}{0pt}}
\setcounter{secnumdepth}{-\maxdimen} % remove section numbering
\ifLuaTeX
  \usepackage{selnolig}  % disable illegal ligatures
\fi
\IfFileExists{bookmark.sty}{\usepackage{bookmark}}{\usepackage{hyperref}}
\IfFileExists{xurl.sty}{\usepackage{xurl}}{} % add URL line breaks if available
\urlstyle{same}
\hypersetup{
  pdftitle={freeNAS-msi-wind},
  hidelinks,
  pdfcreator={LaTeX via pandoc}}

\title{freeNAS-msi-wind}
\author{}
\date{}

\begin{document}
\maketitle

\hypertarget{freenas-msi-wind}{%
\section{freeNAS-msi-wind}\label{freenas-msi-wind}}

\hypertarget{msi-wind-pc-and-freenas}{%
\section{MSI wind pc and freeNAS}\label{msi-wind-pc-and-freenas}}

\hypertarget{specs}{%
\subsection{specs}\label{specs}}

\begin{itemize}
\tightlist
\item
  Single core atom 1.66ghz
\item
  2gb ddr2 memory
\item
  2 x 300gb harddrives
\item
  4gb compact flash card
\item
  Onboard nic
\end{itemize}

\hypertarget{materials}{%
\subsection{Materials}\label{materials}}

\begin{itemize}
\tightlist
\item
  MSI wind nettop
\item
  Memory 2gb ddr2 (laptop)
\item
  Optical to hard disk bay converter.
\item
  Two identical Sata Hard drives of the same capacity.
\item
  freeNAS iso, burned to a CD.
\item
  Sata cd/dvd rom drive (Use to spin up the freenas disk)
\item
  Screw driver.
\item
  4gb compact flash card.
\end{itemize}

\hypertarget{setup}{%
\subsection{setup}\label{setup}}

\begin{enumerate}
\item
  Install all hardware.
\item
  Download freeNAS and install on compact flash as embedded.

  \begin{itemize}
  \tightlist
  \item
    Embedded limits the OS from reading and writing to the compact flash
    card and therefor increases life expectancy. Instead RAM is used for
    swap and temp files.
  \end{itemize}
\item
  Build a raid 1 (mirror) disk array with 300gb drives.
\item
  create any user accounts and share points. In my case SMB.
\end{enumerate}

\hypertarget{end-result}{%
\subsection{end result}\label{end-result}}

.. pull-quote:: Only uses 15-30 watts of electricity, feel good leaving
it on 24/7.

Inexpensive professional grade NAS. All data is backed up locally. If
one drive fails replace it with a good drive and the array rebuilds
itself.

Very fast response and transfer times. Very Stable. ushare allows
streaming to xbox or other media extender. Overall I'm very satisfied
with this project. I will eventually be purchasing larger drives, its
nice to know I can swap one small drive for a larger one and have the
array rebuilt itself.

\hypertarget{references}{%
\subsection{references}\label{references}}

\begin{itemize}
\tightlist
\item
  http://freenas.org
\end{itemize}

\end{document}
